Tetrion TEF330 Hard As Rock Filler (Tube

Tetrion ‘Hard as Rock’ Masonry Repair Filler. Super tough formula for all exterior filling jobs.

• Touch dry in 2 hours
• Accepts screws & bolts
• Will not shrink or crack

Tetrion Hard as Rock Filler is for multi-surface exterior application for all outdoor repair jobs. Suitable for use with plaster, stone, concrete, masonry and wood.

Tetrion Hard as Rock Filler is:

• Designed for Exterior jobs
• Ready mixed Tube Format for convenience and quick repair jobs
• No dosing or mixing required
• Smooth, water-based paste
• Minimal sag
• High strength polymer re-enforced
• Over-Paintable
• Fills up to 10mm depth in one application

Directions for use

1. Ensure surfaces are dry and free of loose material.
2. Work tube well between fingers.
3. Squeeze filler directly into the gap and tool flush with a wet knife.
4. For deeper gaps (>10mm) apply in layers allowing the filler to dry between layers.
5. Sand smooth when dry (surface dry in 4-6 hours).
6. Can be overpainted once fully dry and cured (approx. 24 hours).
7. Over paint with an oil based paint when used externally. Prime with a suitable sealer when over painting with a water-based paint.

After Use

Replace cap to ensure filler stays in good condition. Store away from frost.

Advice

Do not use Tetrion Hard as Rock Filler in wet or damp conditions or on surfaces regularly under water. Do not sandwich between layers of paint and/or sealants.

Supplementary Information.

• Touch dry in 2 hours
• No dosing or mixing required
• Accepts screws & bolts
• Suitable for use with plaster, stone, concrete, masonry and wood.