Carlube Triple R 5W-30 Fully Synthetic R-Tec 22 is an ultra-high-performing engine oil that has been developed to provide maximum engine protection and fuel economy savings. It contains low levels of Sulphated Ash, Phosphorous and Sulphur (SAPS) to ensure after-treatment compatibility and component longevity. This oil is approved to the very latest top-tier specifications including VW 50400/50700, BMW LL-04 and Daimler MB229.52 as well as other leading Original Equipment Manufacturers (OEM) and industry performance requirements. It is therefore suitable for both older vehicles and today\'s most modern engines, including hybrids where such specifications are required.

Carlube Triple R 5W-30 R-Tec 22 provides several key benefits to vehicle owners, including superior engine cleanliness, wear protection, fuel economy and after-treatment device compatibility.

Carlube Triple R 5W-30 R-Tec 22 delivers outstanding engine cleanliness by preventing the formation of harmful engine sludge and deposits. Sludge can cause oil starvation and increased engine wear, and the build-up of deposits can negatively impact on fuel economy, performance and engine life. Carlube Triple R

5W-30 R-Tec 22 keeps key components cool, clean, lubricated and working at their best.

The demand for greater efficiency and reduced emissions has seen an increase in the number of Turbocharged Gasoline Direct Injection (TGDI) engines. The result is a significant increase in engine power densities, which creates more severe operating conditions for the oil and could lead to new phenomena such as Low-Speed Pre-ignition (LSPI).

LSPI is an uncontrolled combustion event thought to be caused by droplets or particles combusting before a spark in the combustion chamber of GDI engines. It can create severe high-pressure conditions and result in broken piston rings and catastrophic engine damage. Both Daimler and the American Petroleum Institute (API) have included a LSPI test in their latest MB 229.52 and SP specifications to protect consumers against LSPI failures.

Guidance

Changing your engine oil depends on the type of vehicle, the mileage, driving styles and driving conditions. Always consult and follow your manufacturer\'s manual for the best guidance on when to change your engine oil and what type of oil to use. 

If necessary, you can check the oil level and easily top up your engine oil.

Ensure your car is on level ground, and the engine is cool and not running, simply open the bonnet, locate the bright handle of your oil dipstick and gently pull the dipstick. 

Clean the dipstick to identify the oil level markers then fully reinsert the dipstick and pull it out once more. The oil shown on the dipstick should sit between the high and low markers. 

If your oil is below the low marker, you should top up with the manufacturer\'s recommended engine oil grade and specifications.

Alternatively, you can book your vehicle for an oil change at your local garage.

Supplementary Information.

• SPECIFICATION - ACEA C3-16 SN MB 229.31/229.51, BMW LL-04, Porsche C30, VW 504 00/507 00
• Carlube Triple R 5W-30 R-Tec 22 provides several key benefits to vehicle owners, including superior engine cleanliness, wear protection, fuel economy and aftertreatment device compatibility.
• This lubricant delivers outstanding engine cleanliness by preventing the formation of harmful engine sludge and deposits. Sludge can cause oil starvation and increased engine wear, and the build-up of deposits can negatively impact on fuel economy, performance and engine life.
• In addition to providing exceptional engine protection and cleanliness, Carlube Triple R 5W-30 R-Tec 22 demonstrates substantial fuel economy improvements, delivering a 1.6% reduction in fuel consumption over the ACEA C3 reference

Carlube Triple R 5W-30 Fully Synthetic R-Tec 22 is an ultra-high performing engine oil that has been developed to provide maximum engine protection and fuel economy savings. It contains low levels of Sulfated Ash, Phosphorous and Sulfur (SAPS) to ensure aftertreatment compatibility and component longevity.

This oil is approved to the very latest top tier specifications including VW 50400/50700, BMW LL-04 and Daimler MB229.52 as well as other leading Original Equipment Manufacturer (OEM) and industry performance requirements. 

Suitable for both older vehicles and today’s most modern engines, including hybrids where such specifications are required

Meets specifications ACEA C3, API SP, BMW LL-04, MB 229.31/229.51/229.52, Porsche C30, VW 504.00/507.00

Carlube Triple R 5W-30 R-Tec 20 has been developed to surpass the specifications of many key vehicle manufacturers, addressing the concerns of vehicle owners. It meets ACEA C3 and the Daimler MB 229.52 specifications, as well as those of other leading vehicle manufacturers, offering extensive performance and protection.

Carlube Triple R 5W-30 R-Tec 20 is a fully synthetic engine oil developed with the very latest synthetic technology for today's modern vehicle requirements. Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.

With ever-increasing fuel prices, it is important to use an engine oil that provides fuel economy benefits. Results of the CEC M111 fuel economy test show that Carlube Triple R 5W-30 R-Tec 20 can improve your vehicle's fuel economy performance by up to 2.1%, reducing operating costs for vehicle owners.

Additionally, Carlube Triple R 5W-30 R-Tec 20 delivers optimum engine durability. Its excellent flow properties allow it to quickly reach and lubricate key engine components, maximising wear protection. It provides over 60% more wear protection compared to the ACEA C3 test limits, maximising engine life and performance.

Guidance

Changing your engine oil depends on the type of vehicle, the mileage, driving styles and driving conditions. Always consult and follow your manufacturer's manual for the best guidance on when to change your engine oil and what type of oil to use. 

If necessary, you can check the oil level and easily top up your engine oil.

Ensure your car is on level ground, and the engine is cool and not running, simply open the bonnet, locate the bright handle of your oil dipstick and gently pull the dipstick. 

Clean the dipstick to identify the oil level markers then fully reinsert the dipstick and pull it out once more. The oil shown on the dipstick should sit between the high and low markers. 

If your oil is below the low marker, you should top up with the manufacturer's recommended engine oil grade and specifications.

Alternatively, you can book your vehicle for an oil change at your local garage.

Supplementary Information.

• SPECIFICATION - ACEA C2/C3-21 API SP BMW LL-04 MB229.31, MB229.51, MB229.52, OV0401547
• Carlube Triple R 5W-30 R-Tec 20 has been developed to surpass the specifications of many key vehicle manufacturers, addressing the concerns of vehicle owners. It meets ACEA C3 and the Daimler MB 229.52 specifications, as well as those of other leading vehicle manufacturers, offering extensive performance and protection.
• Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.
• With ever increasing fuel prices, it is important to use an engine oil that provides fuel economy benefits. Results of the CEC M111 fuel economy test show that Carlube Triple R 5W-30 R-Tec 20 can improve your vehicles fuel economy performance by up to 2.1%, reducing operating costs for vehicle owners.

Carlube Triple R 5W-30 R-Tec 20 is a fully synthetic, mid-SAPS engine oil formulated to provide optimum durability for the latest generation of petrol and diesel engines.

Specifications: ACEA C3, API SN, MB 229.31/229.51/229.52, BMW LL-04

Especially suitable for vehicles fitted with after-treatment devices such as DPFs, EGR or SCR systems.

Triple R 5W-30 R-Tec 20 is a fully synthetic engine oil developed with the very latest synthetic technology for today’s modern vehicle requirements. Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.

Carlube Triple R 5W-30 R-Tec 20 is a fully synthetic, mid-SAPS engine oil formulated to provide optimum durability for the latest generation of petrol and diesel engines.

Specifications: ACEA C3, API SN, MB 229.31/229.51/229.52, BMW LL-04

Especially suitable for vehicles fitted with after-treatment devices such as DPFs, EGR or SCR systems.

Triple R 5W-30 R-Tec 20 is a fully synthetic engine oil developed with the very latest synthetic technology for today’s modern vehicle requirements. Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends:  ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel  \\vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

Supplementary Information.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures 

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel  \\vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

Supplementary Information.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures 

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

Supplementary Information.

• Castrol EDGE 0W-40 A3/B4 is suitable for gasoline and diesel vehicles meeting ACEA A3/B4, API SP, or earlier 0W-40 lubricant specifications.
• Ideal for modern vehicles, providing maximum engine performance and protection.
• Transforms for maximum strength under high pressure, reduces friction, and meets high standards.
• Meets ACEA, API, BMW Longlife-01, MB-Approval, VW, Renault, and Ford specifications.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC\'s breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

Supplementary Information.

• Castrol MAGNATEC features DUALOCK molecules that create a protective force field, reducing warm-up and stop-start wear by 50%.
• Specifically designed for modern driving, it offers continuous protection from every start.
• Suitable for use in gasoline and diesel engines with ACEA C3, API SN, or earlier 5W-40 lubricant recommendations.
• Meets specifications including ACEA C3, API SN Plus, BMW Longlife-04, Fiat 9.55535-S2, and MB 229.31/229.51/229.52.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

Supplementary Information.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Magnatec 5W-30 C3

NON-STOP PROTECTION FROM EVERY START

Description

Clinging molecules, reinvented.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times1 a year.

That's annoying, but worse, it slowly damages your engine – permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect.

Castrol MAGNATEC. Non-stop protection from every start.

1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

Form a powerful force field of protection

Dramatically reduce both warm-up2 and stop-start3 wear by 50%

Deliver protection designed specifically for modern driving

2 Tested versus the Sequence IVA API SN wear limit.

3 Tested versus the CEC OM646LA ACEA wear limits.




Typical Characteristics

Name




Method




Units




Castrol Magnatec 5W-30 C3|




Density @ 15C, Relative




ASTM D4052

g/ml




0.853




Viscosity, Kinematic 100C




ASTM D445

mm²/s




12.1




Viscosity, CCS -30C (5W)




ASTM D5293

mPa.s (cP)




5800




Viscosity, Kinematic 40C




ASTM D445

mm²/s




72




Viscosity Index




ASTM D2270




None




165




Pour Point




ASTM D97




°C




-42




Flash Point, PMCC




ASTM D93




°C




201




Ash, Sulphated




ASTM D874




% wt




0.8




Flash Point, COC




ASTM D92




°C




235

Castrol EDGE 5W-40 A3/B4

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-40 A3/B4 is suitable for petrol and diesel carsand designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommendsand ACEA A3/B4, API SP or earlier specification 5W-40

lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently. Castrol MAGNATEC\'s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect. Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC\'s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver protection designed specifically for modern driving

Product Performance Claims

• ACEA C3
• API SN
• BMW Longlife-04
• Renault RN0700 / RN0710
• Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

Supplementary Information.

• Castrol MAGNATEC\'s DUALOCK molecules create non-stop engine protection.
• Suitable for gasoline and diesel vehicles following API SN, ACEA C3, or earlier 5W-30 specifications.
• Offers a powerful force field of protection and reduces warm-up and stop-start wear by 50%.
• Tailored for modern driving needs and meets various performance claims, including ACEA C3 and API SN.
• Castrol warrants it as suitable for vehicles with MB 226.5/229.31 specifications, and it\'s also compatible with BMW Longlife-04, Renault RN0700/RN0710, and Fiat 9.55535-S3.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently. Castrol MAGNATEC\'s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect. Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC\'s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver protection designed specifically for modern driving

Product Performance Claims

• ACEA C3
• API SN
• BMW Longlife-04
• Renault RN0700 / RN0710
• Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

Supplementary Information.

• Castrol MAGNATEC\'s DUALOCK molecules create non-stop engine protection.
• Suitable for gasoline and diesel vehicles following API SN, ACEA C3, or earlier 5W-30 specifications.
• Offers a powerful force field of protection and reduces warm-up and stop-start wear by 50%.
• Tailored for modern driving needs and meets various performance claims, including ACEA C3 and API SN.
• Castrol warrants it as suitable for vehicles with MB 226.5/229.31 specifications, and it\'s also compatible with BMW Longlife-04, Renault RN0700/RN0710, and Fiat 9.55535-S3.

Castrol EDGE 5W-30 LL

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-30 LL is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3 5W-30 lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

Suitable for use in hybrid cars

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Castrol EDGE 5W-40 A3/B4

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-40 A3/B4 is suitable for petrol and diesel carsand designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommendsand ACEA A3/B4, API SP or earlier specification 5W-40

lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends:  ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel  \\vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

Supplementary Information.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures 

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

Supplementary Information.

• Castrol EDGE 0W-40 A3/B4 is suitable for gasoline and diesel vehicles meeting ACEA A3/B4, API SP, or earlier 0W-40 lubricant specifications.
• Ideal for modern vehicles, providing maximum engine performance and protection.
• Transforms for maximum strength under high pressure, reduces friction, and meets high standards.
• Meets ACEA, API, BMW Longlife-01, MB-Approval, VW, Renault, and Ford specifications.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

Supplementary Information.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC\'s breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

Supplementary Information.

• Castrol MAGNATEC features DUALOCK molecules that create a protective force field, reducing warm-up and stop-start wear by 50%.
• Specifically designed for modern driving, it offers continuous protection from every start.
• Suitable for use in gasoline and diesel engines with ACEA C3, API SN, or earlier 5W-40 lubricant recommendations.
• Meets specifications including ACEA C3, API SN Plus, BMW Longlife-04, Fiat 9.55535-S2, and MB 229.31/229.51/229.52.

EDGE 0W-30

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 0W-30 is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SP or earlier specification

0W-30 lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

Castrol EDGE 0W-30 delivers against HYSPEC, Castrol's new hybrid performance standard**

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

**Across critical areas of contaminants, engine intermittency and system efficiency.

Magnatec 5W-30 C3

NON-STOP PROTECTION FROM EVERY START

Description

Clinging molecules, reinvented.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times1 a year.

That's annoying, but worse, it slowly damages your engine – permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect.

Castrol MAGNATEC. Non-stop protection from every start.

1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

Form a powerful force field of protection

Dramatically reduce both warm-up2 and stop-start3 wear by 50%

Deliver protection designed specifically for modern driving

2 Tested versus the Sequence IVA API SN wear limit.

3 Tested versus the CEC OM646LA ACEA wear limits.




Typical Characteristics

Name




Method




Units




Castrol Magnatec 5W-30 C3|




Density @ 15C, Relative




ASTM D4052

g/ml




0.853




Viscosity, Kinematic 100C




ASTM D445

mm²/s




12.1




Viscosity, CCS -30C (5W)




ASTM D5293

mPa.s (cP)




5800




Viscosity, Kinematic 40C




ASTM D445

mm²/s




72




Viscosity Index




ASTM D2270




None




165




Pour Point




ASTM D97




°C




-42




Flash Point, PMCC




ASTM D93




°C




201




Ash, Sulphated




ASTM D874




% wt




0.8




Flash Point, COC




ASTM D92




°C




235

Castrol EDGE 0W-30 LL

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for the same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Application

Castol EDGE 0W-30 LL is suitable fo petrol, diesel and hybrid cars and designed to meet the latest specifictions required by modern engines where the vehile manufacturer recommends an ACEA C3 0W-30 lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

Castrol EDGE 0W-30 LL delivers against HYSPEC, Castrol's new hybrid performance standard**

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

**Across critical areas of contaminants, engine intermittency and system efficiency.

Castrol MAGNATEC 5W-40 C3

Non-stop protection from every start.

Description

Clinging molecules, reinvented.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times1 a year.

That's annoying, but worse, it slowly damages your engine – permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

Form a powerful force field of protection

Dramatically reduce both warm-up2 and stop-start3 wear by 50%

Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014

2 Tested versus the Sequence IVA API SN wear limit.

3 Tested versus the CEC OM646LA ACEA wear limits

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant.

Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Castrol EDGE 5W-40 A3/B4

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-40 A3/B4 is suitable for petrol and diesel carsand designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommendsand ACEA A3/B4, API SP or earlier specification 5W-40

lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Castrol EDGE 5W-30 M

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-30 M is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SN Plus or earlier

specification 5W-30 lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

Suitable for use in hybrid cars

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Castrol EDGE 5W-30 LL

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-30 LL is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3 5W-30 lubricant.

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

Suitable for use in hybrid cars

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

EDGE 0W-40 A3/B4

Fluid TITANIUM - Stronger Under Pressur

Description

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense

pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant.

Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 0W-40 A3/B4:

Transforms to be strongest when the pressure is highest, protecting your engine

Reduces power-robbing friction across engine speeds and conditions

Independently tested at the highest standards for proven performance

Recommended by world-leading car manufacturers

Protects the engine for the entire drain interval even under extreme pressure

Delivers high levels of fuel efficiency and low temperature performance