Tetrion TSG003 Super Glue Pen 3g

Tetrion Super Glue Pen provides a tough, permanent bond in just seconds. Tetrion Super Glue Pen will bond a variety of surfaces including metal, wood, ceramics, card and most plastics making it perfect for use on models or for minor repairs. The pen format allows for precise application, ensuring the glue is only applied where it is needed.

• Strong permanent bond
• Bonds and holds in 10-20 seconds – Sets in under 1 minute
• Fully cured at 24 hours
• Resistant to chemicals/solvents
• Easy-to-use push point applicator for precise application
• Temperature resistant -50?c to 80?c

Directions for Use

1. Ensure surfaces are dry and free from dirt, oil or grease.
2. Unscrew the cap and apply the adhesive to one surface only.
3. Firmly press the two surfaces together until the glue sets (1 minute).
4. After using, clean the tip with a dry cloth before replacing the cap to prevent bonding and store upright in a cool dry place.
5. Fully cured after 24 hours at 25?c.

Note: Not suitable for use with polyethylene, polypropylene, expanded polystyrene, non-stick coatings, silicone rubber or glass. Do not use in areas that will be continually wet or on items that will contain very hot liquids.

Supplementary Information.

• Bonds and holds in 10-20 seconds - Sets in under 1 minute
• Fully cured at 24 hours
• Ideal for bonding metal, wood, ceramics, card & most plastics
• Easy-to-use push point applicator for precise application